Welcome, Sign In
Email:

Password:

Forgotten Password
Create Account
First time visitor? Create a New Account
Advanced Search
Your cart is empty 		Checkout

Biotech Systec ZHCR Degassing Dual Stage (DST) Vacuum Pump Control System with PCB and Air Bleed, Analytical, Bottom Mounted - 9000-1920

Price: £963.25


Qty. 
+-
Download Data Sheet

Biotech Systec ZHCR (Zero Hysteresis / Constant Run) Degassing Dual Stage (DST) Vacuum Pump Control System with PCB, Analytical, Bottom Mounted, for DEGASi Degassers - Includes Pump, PCB and Air Bleed

Part Number: 9000-1920

This Degassing Vacuum Control System is designed for simple plug and play operation into most of our degassing chambers. Simply provide 24DC and the system will automatically provide vacuum to the specified vacuum level. Built in continuous head purges ensure that moisture and vapor are swept out of the pump to maintain consistent performance. An optional connector is available for LED error outputs.

This all new generation of pumps is characterized of being almost entirely silent – a remarkable upgrade from older versions. It’s also lighter and operates with less vibrations.

The DST Pump with PCB is a vacuum control system for use with degassing chambers. The system includes a dual stage (DST) vacuum pump and a Smart board controller to maintain vacuum levels. There is a connector for optional external LED indicators or error outputs. The prep versions are designed to handle high vapor loads from high flow rate chambers or fluids with low vapor pressure that will cause increased solvent pervaporation through the membrane.

Systec ZHCR Dual Stage (DST) Vacuum Pump Control System Range:

Part Number Description Mounting Scale
Vacuum Degassing Control System - includes Pump, PCB and Air Bleed
9000-1920 Vacuum Control System Bottom Analytical
9000-1921 Vacuum Control System Side Analytical
9000-1922 Vacuum Control System Bottom Prep
9000-1923 Vacuum Control System Side Prep
Pump Only
9000-1892 Vacuum Pump Only Bottom Analytical
9000-1893 (Replaced by 9000-2061) Vacuum Pump Only Side Analytical
9000-1896 Vacuum Pump Only Bottom Prep
9000-1897 Vacuum Pump Only Side Prep

PUMP CONTROL SPECIFICATIONS:

Power Requirements 24 VDC @ 0.75 Amp max. (< 5 Watts consumption average)
Temperature 50 o C or lower when run in ambient conditions (20- 25 o C)
Vacuum Sensor Calibration Accuracy Prep 80 mmHg +/- 5 mmHg Analytical 50 mmHg +/- 5 mmHg
Closed-Loop Control Setpoint 50 mm Hg absolute (analytical) or 80mm Hg (prep) pump runs at high RPM until near setpoint, then speed is varied to maintain a value of setpoint— load independent.
Errors Detected 1 – Pumpdown: Prep — Unable to reach 82 mm Hg in 10 minutes. Analytical — Unable to reach 52mm Hg in 10 minutes.
2 – High Vacuum: Prep — Vacuum > 110 mmHg for more than 6 min. in the running state (after pumpdown). Analytical — Vacuum > 82 mmHg for more than 6 min. in the running state (after pumpdown).
3 – Sensor Signal: Sensor Failure Detected Sensor signal >800 mm Hg or sensor signal <10 mm Hg.
ANALYTICAL VACUUM PUMP TECHNICAL DATA
Air Flow (no vacuum): 650 SCCM @ 400 RPM; 100 SCCM @ 60 RPM
Typical Vacuum Performance: 50 mmHg @ (60±20) RPM (3 SCCM air flow, closed loop)
Pump-down Time: <1 minute (with 4 MINI degassing channels, 50 cc total internal volume)
Pump Head Continuous Purge Air Flow Rate ~12 SCCM
Vacuum Flow Path Materials: 303 Stainless Steel, Polypropylene, PTFE, EPDM Rubber
Expected Lifetime: :>5 years (continuous run @ 60 RPM)
PREP VACUUM PUMP TECHNICAL DATA
Air Flow (no vacuum): 650 SCCM @ 400 RPM; 100 SCCM @ 60 RPM
Typical Vacuum Performance: 80 mmHg @ (80±20) RPM (3 SCCM air flow, closed loop)
Pump-down Time: <1 minute (with 4 MINI degassing channels, 50 cc total internal volume)
Pump Head Continuous Purge Air Flow Rate: : ~30 SCCM
Vacuum Flow Path Materials: 303 Stainless Steel, Polypropylene, PTFE, EPDM Rubber
Expected Lifetime >5 years (continuous run @ 60 RPM)

Tags: Degassers, Degassing Spare Parts, Vacuum Control Systems, Vacuum pumps with control board

 


  • Model: 9000-1920
  • Manufactured by: Biotech

Product 8/20

Previous
Return to the Product List
Next
Desktop Version
© 2024 UVISON Technologies Limited. All rights reserved  |  Registered in England and Wales under company number 4718736 and VAT number GB 702 1041 10
wabusiness template