XDS5 3-phase 200/380/415/460 V set to high volts
Overview: The XDS pumps are an innovative design which use a bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS5 pump is designed for pumping condensable vapours and uses materials selected for a wide range of laboratory wet chemistry applications.
Technology: Scroll pumps use intermeshing fixed and orbital scrolls to form non-contacting, crescent shaped gas pockets that are continuously compressed by the orbiting action. This means that, unlike oil-sealed rotary pumps, there is no sealant or lubricant required in the swept volume of the pump.
Features and Benefits
Lubricant-free within the vacuum envelope and hermetically sealed means totally clean and dry vacuum to prevent cross contamination
No atmosphere to vacuum shaft seals means bearings are completely isolated, which prevents process attack and means the bearings run cooler and last longer
No oil changes required eliminating costs of contaminated oil disposal
Simple single sided scroll design means routine maintenance is done in minutes for low cost of ownership and maximum up-time
Gas ballast feature to enable pumping of vapours
Applications
- General clean pumping applications
- Scanning Electron Microscopes - SEM
- Beam lines and high energy physics
- Backing turbo pumps
- Centrifuges, ultra-high speed
- Coating
- Cryogenics
- Degassing/curing - oil, epoxy resin
- Distillation/extraction/filtration
- Freeze drying
- Furnaces
- Gel drying
- Laboratory bench top vacuum
- Lasers, gas recovery and recirculation
- Leak detectors, Helium
- Load locks and transfer chambers
- Rare gas recirculation
- Rare gas recovery
- Refrigeration manufacture
- Research and development
- Rotary, centrifugal evaporators
- SEM/FIB (ion beam repair)
- Solvent recovery
- Surface science instruments
Technical Data
Displacement | 50Hz - 5.7 m3h-1 / 3.4 ft3min-1 60Hz - 6.7 m3h-1 / 4.0 ft3min-1 |
Peak pumping speed1 | 50Hz - 4.8 m3h-1 / 2.8 ft3min-1 60Hz - 6.0 m3h-1 / 3.5 ft3min-1 |
Ultimate vacuum (Total pressure) | 50Hz - 7 x 10-2 mbar / 5.3 x 10-2 Torr 60Hz - 6 x 10-2 mbar / 4.5 x 10-2 Torr |
Max inlet pressure for water vapour | 50 mbar / 38 Torr |
Max water vapour pumping rate – GB I | 70 gh-1 |
Max water vapour pumping rate – GB II | 200 gh-1 |
Max allowed outlet pressure | 1 bar gauge / 14 psig |
Max allowed inlet and gas ballast pressure | 0.5 bar gauge / 7 psig |
Motor power 1-ph and 3-ph | 0.3kW |
Power Connector 1-ph | IEC EN60320 C13 |
Nominal rotation speed 50/60 Hz | 1500 / 1800 rpm |
Weight | 23 kg / 51 lb |
Inlet flange | NW25 |
Exhaust flange | NW25 |
Noise level | 55 dBA @ 50 Hz |
Vibration | <4.5 mms-1 (rms) |
Leak tightness (static) | <1 x 10-6 mbar ls-1 |
Operating temperature range | 0.5 bar gauge / 7 psig |
- Model: XDS5 - A72401905
- Manufactured by: Edwards