Remote Control Outlet (Nozzle)
Introduction
DosaPrep ® Remote Control Outlet speeds up the dispensing of the medium into the vessels, as dispensing may be controlled directly at the outlet. All major keys of the instrument are duplicated on the handle: “Start”, “Stop”, and “Dispense”.
The remote control exists in two versions: for electric plug at the rear of the instrument and for electric plug at the front of the instrument.
Outlet at the rear of the instrument: Note the serial number plate at the rear of the instrument, where the plug for the remote outlet is described as “Remote Control”. In this case there will be no outlet at the front.
Outlet at the front of the instrument: There is a plug for the remote control just beside the liquid outlet at the front of the instrument.
Specifications
Tubing, length :- 3 m
Length of cable, order no. 71-1030 (electric plug at the rear of the instrument) :- 4 m
Length of cable, order no. 71-1032 (electric plug at the front of the instrument) :- 3 m
Dimensions of handle, height without/with liquid outlet :- approx. W 5 cm x H 6/24 cm x L 24 cm
Weight approx. :- 0.2 kg
How to find out which remote control you need?
Check the serial number plate on the rear of the instrument and read the description for the two small plugs.
order no. 71-1030 (electric plug at the rear of the instrument) - “remote control” for upper plug and “RS232” for lower plug
order no. 71-1032 (electric plug at the front of the instrument) - “COM2” for upper plug and “COM1” for lower plug
Look at the outlet at the front and check if there is a plug beside the outlet.
- Model: 71-1032
- Manufactured by: Dosatec GmbH