Modular Column System
Biotech Isolation Technologies Modular Systems 4.6mm ID 5cm, Frit 2µm
4.6x50mm Modular Asy-2 µm Frit
Product Number: 5041IP-05046-005-20
Modular Column Hardware guarantees a high-pressure seal between the tubing and end fitting, as well as a proper seating of the frit. The frit is contained in a cap that slides over the column, forming a leak-free and gap-free seal. All stainless steel modular columns use our exclusive Isobore™ internal surface finish. Our columns come in lengths of 3.3cm to 25cm and are available with Frit 0.5µm and Frit 2µm frit porosity. Isobore-grade surface finish reduces drag at the column wall and improves column efficiency and performance by providing an extremely smooth, flat, and clean surface; it also features a surface finish with typical values around 8 µin.
- Operates at pressures up to 15,000 psi (1034 bar)
- Precision machined from high purity LC grade 316 stainless steel
- available in custom IDs and lengths
Modular column hardware systems include the following components:
- one 316 stainless steel column body
- two one-piece end fittings and two frit caps containing 316 stainless steel frits in a PEEK™ cap.
Specifications:
Port Geometry | Parker Port |
---|---|
Pressure Rating Max (psi) | 15000 |
Frit Porosity (µm) | 2 |
Length (cm) | 5.0 |
Material | Stainless Steel |
Outer Diameter (in) | 5/16 |
Pressure Rating Max (bar) | 1034 |
Isolation Technologies is now part of IDEX Health & Science and Biotech Fluidics.
- Model: 5041IP-05046-005-20
- Manufactured by: Biotech