Edwards Pump Accessories

A48015137 – Condenser for D-LAB Diaphragm Pumps (supplied with fittings for attachment to the baseplate)

Overview For use on XDS pumps that are not connected to a house exhaust system. These silencers also offer exhaust filtration.

  Overview A22304198 – EMF10 Oil mist filter element for : E-LAB 2 Rotary Pump 3.7 m 3 h -1 , 2.2 ft 3 min -1 , 61.7 l min -1 Outlet Mist Filters

Overview The FL20K foreline trap has been developed for use in clean pumping systems, to prevent the back-migration of rotary pump oil mist into the system. The FL20K is most useful with two-stage rotary pumps, operating below 1 mbar. To maximize...

Overview These catchpots minimize the entry of condensable vapors into the pump.     Sorbent charge not supplied. Supplied with NW25 clamp, centering ring and ‘O’ ring.

Overview Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist filter...

Overview Mist filters capture oil mist from the outlet of pumps, which would otherwise be ejected into the atmosphere. This may happen when you use gas ballast or when you pump high gas throughputs. You can also return oil trapped in the mist...

Overview A22304079 – EMF10 Oil mist filter odor element (pk 5) for : E-LAB 2 Rotary Pump 3.7 m3h-1, 2.2 ft3min-1, 61.7 l min-1 Outlet Mist Filters

Silencer spares kit

XDD1 diaphragm service kit