PerkinElmer FPD Amplifier for PerkinElmer AutoSystem Series GCs - N6120095

FPD Amplifier for PerkinElmer AutoSystem Series GCs. The FPD is a highly sensitive and selective detector for both sulfur and phosphorus compounds. It is especially suitable for environmental monitoring of H2S and sulfur gases general and for organophosphorus compounds present at trace levels pesticide analysis. Alkyl tin compounds can also be analyzed by changing the filter assembly. The sulfur filter is shipped as standard. The FPD mounts either the front or rear detector position. This allows many detector combinations, such as FPD/FPD, FPD/TCD or FPD/ELCD. The Autosystem also includes a linearizer function for the sulfur mode, and convenient control of the photomultiplier tube from the keyboard. The FPD is capillary-column compatible. The detector will accept columns of 0.530mm Inner Diameter or less. The standard jet shipped with the FPD does not have a glass-lined tail pipe. If an all-glass system is required and glass packed columns will be used, then a glass-lined tail pipe should be ordered. As a reminder, use of packed 1/4in. columns requires a 1/8in. to 1/4in. adapter. Kit includes detector, heater and sensor, heater block, hydrogen needle valve, air pressure regulator, and sulfur photomultiplier filter. Requires but does not include FPD amplifier (P/N N6120095). Firmware revision 1.6 or greater required. Firmware must be service installed. Autosystem operators manual (P/N 9938559) revision E or higher required.