Photron 37 mm Multi Element Hallow Cathode Lamp (HCL), 7 Pin Coded for Thermo Fisher/Unicam, Chromium / Cobalt / Copper / Iron / Manganese / Nickel (Cr/Co/Cu/Fe/Mn/Ni) - P873UC

Photron 37 mm Multi Element Hallow Cathode Lamp (HCL), 7 Pin Coded for Thermo Fisher / Unicam, Chromium / Cobalt / Copper / Iron / Manganese / Nickel (Cr/Co/Cu/Fe/Mn/Ni)

P873UC - Hollow Cathode Lamp (HCL) - Chromium / Cobalt / Copper / Iron / Manganese / Nickel 

Product Number: P873UC

Hollow Cathode Lamp P500UC / P5-0000UC / P870UC Series - (37mm / 1.5") Multi Element Thermo Fisher / Unicam

Diameter: 37mm / 1.5” (Inch)

Instrument

• Photron's P500UC / P870UC / P5-0000UC Series for Thermo/Unicam AAS Instruments compatible with 37mm or 1.5" base 7 Pin Octal Base, Coded Hollow Cathode Lamps including AAS models such as 3300 AAS, 3400 AAS, 3500 AAS, ICE 3300, ICE 3400, ICE 3500.

Pin Type / Connectivity

• Pin Type: Seven (7) Pin
• Coding: Coded

Wavelength

• Elements: Chromium / Cobalt / Copper / Iron / Manganese / Nickel (Cr/Co/Cu/Fe/Mn/Ni)
• Primary Wavelengths: 170 ~ 380 nm

Optical

• Window material: Quartz

Hollow cathode lamps produced by Photron are designed and manufactured to achieve all of the following fundamental requirements for a spectral line source.

• Intense emission of resonance (ground state derived) lines.
• Narrow line width, for maximum sensitivity and linearity.
• Minimal spectral interference from continuum emission, present in the cathode.
• Rapid warm up to produce stable long term light emission.
• Noise free operation. + Long running life and a 5 year shelf life.
• Cathode materials and geometry achieve a combination of spectral purity and a suitable sputtering rate. (A high sputtering rate will give high intensity at the expense of lamp life, sensitivity and linearity).

Hollow Cathode Lamps (Multi Element) - All

HCL Multi-Element Overview

• Photron's P500 & P5 Multi Element HCLs: All AAS systems (37mm or 1.5")
• Photron's P600 & P6 Multi Element HCLs: Perkin Elmer (51mm or 2")
• Hollow cathode lamps produced by Photron are designed and manufactured to achieve all of the following fundamental requirements for a spectral line source.
• Intense emission of resonance (ground state derived) lines.
• Narrow line width, for maximum sensitivity and linearity.
• Minimal spectral interference from continuum emission, present in the cathode.
• Rapid warm up to produce stable long term light emission.
• Noise free operation.
• Long running life and a 5 year shelf life.
• Cathode materials and geometry achieve a combination of spectral purity and a suitable sputtering rate. (A high sputtering rate will give high intensity at the expense of lamp life, sensitivity and linearity).