Systec Stand Alone 4480v MINI Degassing System - 0001-6354 (0001-6501) *Replaced by 0001-6354-A*

THIS PRODUCT HAS BEEN REPLACED BY PRODUCT NUMBER 0001-6354-A (SEE LINK BELOW)

0001-6354-A - 4-channel Biotech DEGASi Classic Degasser, 480 µl Systec AF

Systec Stand Alone 4480v MINI Degassing Systems 

Part Number: 0001-6354

The Systec Stand Alone MINI HPLC vacuum degassing system for HPLC is a high efficiency in line module that removes dissolved gasses from HPLC mobile phases. Its unique design assures reliable continuous operation and the highest level of continuous performance available without the need for helium degassing. Up to five solvent lines may be degassed 
simultaneously by one unit. 

Features

• Ultra-high degassing efficiency 
• Low volume, easy to prime 
• Patented control eliminates baseline fluctuations 
• Single lumen design for consistent degassing Inert flow path
• 5+ year lifetime
• Excellent chemical compatibility flow path
• 2-pin vacuum level validation output
• CE & RoHS compliant
• 0001-6500, -6501 are Systec branded versions of the OEM 0001-6352, -6354
• ZHCR® Control with Built-in Test Diagnostics 
• Microcontroller self-test vacuum sensor validation on power-up
• Continuous vacuum system monitoring to ensure optimum operational conditions are maintained
• Vacuum system fault detection and shutdown function indicators 
• Systec AF / ZHCR Degassing Technology

Flow-through vacuum degassing chamber with a single amorphous perfluorinated copolymer (Systec AF) degassing membrane, enabling degassing efficiency 50 times that of PTFE. 

The ZHCR (Zero Hysteresis / Constant Run) vacuum pump employs a patented closed-loop, micro-stepping RPM control strategy permitting the pump to run with continuously  variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM. Fluctuations in detector baseline due to changes in vacuum  level are eliminated by not having to repeatedly stop and start a single-speed pump. This also greatly reduces wear and noise. The brush-less motor enables quiet operation and is appropriate for environments where solvent vapors may be present.

• Validation Output - A 2-pin rear panel receptacle labeled “Validation” with mating screw-lock plug is provided to allow a validation signal from the control circuit to be sent to a computer or data system. This validation output indicates vacuum level.
• Signal: 5mV DC 0.13 kPa (1 mmHg) / absolute from 2.7 to 106.7 kPa (20 to 800 mmHg) (0.100 V DC at 2.7 kPa (20 mmHg); 4.000V DC at 1.067 kPa (800 mmHg))
• Accuracy: ±1.0% of reading ±0.010V DC from 2.7 to 106.7 kPa (20 to 80 mmHg)
• Power Requirement: Input Power required with AC Adapter (included): 100 to 240V AC (±10%), 1A, 50 to 60 Hz (±3 Hz) - Four interchangeable wall sockets are supplied with the AC Adapter: North America/Japan, U.K., Continental  Europe, Australia.
• CE Certification: This product has been certified under the following CE testing standards: EN61326-1; EN55011; EN61300-3-2; EN61300-3-3 & EN61010-1.

Specifications

• Stand-Alone Degassing Modules
• Number of Degassing Channels: 4
• Degassing Efficiency† @ 1 mL / min MeOH > 70% O2 Removal
• Membrane Material: SYSTEC AF
• Other Wetted Materials PEEK, PPS(GF), PTFE(GF), FEP
• Solvent Compatibility: Not compatible with fluorinated solvents.Special version available for GPC solvents.
• Flow Path ID: 1.14 mm (0.045”)
• Internal Volume: 480 μL (standard)
• Maximum Pressure: (@ 25 °C) 0.5 MPa (70 psi)
• Pressure Drop: 0.18 kPa/mL/min
• † Degassing efficiency can be optimized based on flow rate, fluid to be degassed, and gas to be removed. 1 Standard ID; other sizes available.