Upchurch Solvent Inlet Solvent Filter with stem for 1/8 inch ID Tubing, Waters Compatible, 10 um, 40 mL/min, Stainless Steel, Single - A-310

Inlet Solvent Filter with stem for 1/8” ID Tubing, Waters Type, 10 μm, 40 mL/min, Stainless Steel, Single pack

Fittings not included

Product Number: A-310

Categories: Filters, Filters & Frits, Fluidic Connections, Inlet Solvent Filters

This Upchurch Scientific, IDEX Health & Science, Biotech Fluidics Inlet Solvent Filter with a stem is a Waters Compatible providing the protection your system needs. It is specifically designed to prevent pump and other system component damage. It has a porosity of 10µm and has a 1/8" ID tubing.

Related Products:

• 1524XL - FEP Tubing 3/16" OD x .125" ID Natural 100ft

Specifications:

Inlet Solvent Filters

• Large surface areas prevent pump cavitation
• Disposable
• 2 μm, 10 μm, and 20 μm pore sizes available
• General use and prep filters for higher flow applications

It is good practice to filter your solvents to prevent pump damage. Our 316 stainless steel filters provide that protection.

Because filters should be changed periodically, we make it easy to replace them without tools. For those filters using a plastic fitting, the tubing can be reconnected by finger tightening the fitting into the new filter. The filters with stems allow easy insertion into the inlet tubing.

* Maximum suggested flow rates are determined by porosity and surface area.