Upchurch Scientific Biocompatible Inline Filter Assy, 10-32 Coned Threads, 2 um Porosity, 6,000 psi, Single - A-430

Inline Filter Assembly 2µm - Single pack

Product Number: A-430

Categories: Filters, Filters & Frits, Fluidic Connections, Inline Filters

This Upchurch Scientific / IDEX Health & Science / Biotech Fluidics Inline Filter Assembly has the reliability of stainless steel and a 100% PEEK flow path which offers excellent chemical resistance. This filter include a stainless steel body and two biocompatible PEEK fittings. It and has a porosity of 2µm.

Related Products:

• A-429X - Filter End Fittings PEEK 2µm /10 - Pack
• F-120 - One-Piece Fingertight 10-32 Coned, for 1/16" OD Natural - Single

Available in the Following Configurations:

• A-430 - Single pack
• A-430C - 100 per pack

Inline Filters

Inline Filters are specially engineered for inline filtration. They are specifically designed to help prevent particulate contamination from clogging sensitive equipment. It is ideally suited for placement along the flow path line between the pump and injection valve/autosampler. Upchurch / Idex offer a variety of porosities for your application.

Standard Inline Solvent Filters

• For 1/16” OD tubing
• Versions for Standard HPLC (6,000 psi/414 bar) and UHPLC (25,000 psi/1,725 bar)
• Replacement frits availableVersions for Standard HPLC (6,000 psi/414 bar) and UHPLC (25,000 psi/1,725 bar)
• Help prevent particulate contamination from clogging sensitive equipment
• Ideally suited for placement along the flow path line between the pump and injection valve/autosampler

Inline filter assemblies that begin with the letter “A” are engineered for standard HPLC applications (up to 6,000 psi/414 bar). Inline Filter Assemblies that begin with the “VHP” prefix are suitable for use in UHPLC systems, where pressures can reach 25,000 psi (1,725 bar).

Biocompatible Standard Inline Filters

• 0.5 μm and 2 μm versions available
• Features 100% PEEK flow path

These A-430 and A-431 Inline Filters consist of a stainless steel body and two PEEK end fittings. Maximum recommended flow rate is 25 mL/min for the A-430 Filter and 10 mL/min for the A-431 Filter. And, you get the added benefit of biocompatibility since all wetted surfaces are PEEK. When you need to replace the frit, simply dispose of the end fitting that contains the frit and replace it with a new one.

*Swept volumes include/reflect theoretical frit volume values.
SST = Stainless Steel