Flangeless Ferrule for 1/16″ OD Tubing, 1/4-28 Flat-Bottom, Tefzel (EFTE), Natural, 10 per pack
Part Number: P-200NX
Categories: Fittings, Flangeless Fittings, Flat-Bottom Fittings, Fluidic Connections
These Upchurch Scientific / IDEX Health & Science / Biotech Fluidics Flangeless Ferrule is easy to use and eliminates the need to flanged tubing. It is manufactured from Tefzel (ETFE) offering excellent solvent resistance. This reusable ferrule is included Flangeless Fitting assemblies for 1/16″OD tubing and can also be ordered as a replacement part. It also comes in blue and natural color.
Flangeless Fittings
Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
Convenience: Flangeless Fittings are easy to use. Just slip the nut and ferrule over the tubing and finger tighten the assembly into your receiving port. In tests, it is shown that the ideal amount of torque to achieve expected part performance should be approximately 3–4 in-lbs (0.34–0.45 N·m). Check out the line of special tightening tools designed to adapt to many standard torque wrenches, on page 50 and the adjustable torque driver, VHP-4000.
Minimal Down-Time: Component replacement is quick, taking only a few seconds — unlike the significant time required to flange tubing.
Cost-Effectiveness: Repairing a flanged tubing assembly requires a costly flanging tool or the purchase of a complete replacement assembly, including a new length of tubing and a set of fittings. The Flangeless Fittings system typically requires only one new ferrule at minimal cost when repairing a connection.
Flangeless Fittings for 1/16” and 1/8”OD Tubing
- Wide variety of materials and geometries to fit most applications
- Excellent replacement for flanged fittings
- Convenient and easy to use
- Fittings and ferrules packaged together for easy ordering convenience
Flangeless Fittings for 1/16” OD Tubing, and for 1/8” OD Tubing are available in a variety of materials. The replacement ferrules are manufactured from inert ETFE, and are sold in a colored version or ETFE’s natural color as the N option. The smaller ferrules, XP-240x and XP-340x are designed for shallow ports. These fittings are packaged together with the ferrules in convenient 10-packs. The 1/16” version include the XP-200x ferrule, and the 1/8” verison include the XP-300x ferrule.
Related products:
- P-630 - ETFE True ZDV Union for 1/16” OD Tubing Includes (2) P-200N/P-245
- P-632 - ETFE Tee for 1/16” OD Tubing Includes (3) P-245, (3) P-200N
- P-634 - ETFE Cross for 1/16” OD Tubing Includes (4) P-245, (4) P-200N
Available in the Following Configurations:
- P-200N - Single Pack
- P-200NX - 10 Pack
- P-200NC - 100 Pack
Flangeless Fittings
Part No. | Description | Port | Pressure Rating | Head Style | Material |
FLANGELESS FITTINGS FOR 1/16” OD TUBING | |||||
XF-358 | Flangeless Fitting for 1/16” OD Tubing, FlushNut | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | FlushNut | SST |
XLT-111 | Flangeless Fitting for 1/16” OD Tubing | 10-32 Flat-Bottom | 2,500 psi (172 bar) | Standard Knurl | PEEK Natural |
XP-201 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | Delrin Black |
XP-202 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | Delrin Red |
XP-218 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | ETFE Natural |
XP-230 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | PEEK Natural |
XP-235 | Flangeless Fitting for 1/16” OD Tubing, Short | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | PEEK Natural |
XP-238 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | Delrin Purple |
XP-245 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Standard Knurl | PFA Natural |
XP-286 | Flangeless Fitting for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | Headless Knurl | PPS Natural |
REPLACEMENT FERRULES FOR 1/16” OD TUBING | |||||
XP-200 | Flangeless Ferrule for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | — | ETFE Blue |
XP-200N | Flangeless Ferrule for 1/16” OD Tubing | 1/4-28 Flat-Bottom | 2,000 psi (138 bar) | — | ETFE Natural |
XP-240 | Flangeless Ferrule for 1/16” OD Tubing, Small Valve | 1/4-28 or 10-32 Flat-Bottom | 2,500 psi (172 bar) | — | ETFE Natural |
FLANGELESS FITTINGS FOR 1/8” OD TUBING (INCLUDES P-300 FERRULES) | |||||
XF-368 | Flangeless Fitting for 1/8” OD Tubing, FlushNut | 1/4-28 Flat-Bottom | 500 psi (34 bar) | FlushNut | SST |
XP-301 | Flangeless Fitting for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | Delrin Black |
XP-302 | Flangeless Fitting for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | Delrin Red |
XP-305 | Flangeless Fitting for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | Delrin Green |
XP-308 | Flangeless Fitting for 1/8” OD Tubing, Short | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | Delrin Black |
XP-315 | Flangeless Fitting for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | ETFE Natural |
XP-330 | Flangeless Fitting for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | PEEK Natural |
XP-335 | Flangeless Fitting for 1/8” OD Tubing, Short | 1/4-28 Flat-Bottom | 500 psi (34 bar) | Standard Knurl | PEEK Natural |
REPLACEMENT FERRULES FOR 1/8” OD TUBING | |||||
XP-300 | Flangeless Ferrule for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | — | ETFE Yellow |
XP-300N | Flangeless Ferrule for 1/8” OD Tubing | 1/4-28 Flat-Bottom | 500 psi (34 bar) | — | ETFE Natural |
XP-340 | Flangeless Ferrule for 1/8” OD Tubing, Small Valve | 1/4-28 Flat-Bottom | 500 psi (34 bar) | — | ETFE Natural |
XP-312 | Lock Nut for Flangeless Nuts | 1/4-28 Flat-Bottom | — | — | Delrin White |
- Model: P-200NX
- Manufactured by: Upchurch Scientific