Upchurch Scientific Flangeless Ferrule for 1/16 inch OD Tubing, 10-32 Coned, 1/4 inch Hex, Tefzel ETFE, Blue, 100/Pk - P-200C

Flangeless Ferrule for 1/16” OD Tubing, M6 or 1/4-28 Flat-Bottom, Tefzel ETFE Blue - 100 PER PACK

Product Number: P-200C

Categories: Fittings, Flangeless Fittings, Flat-Bottom Fittings, Fluidic Connections

This Upchurch Scientific / IDEX Health & Science / Biotech Fluidics Flangeless Ferrule is easy to use and eliminates the need to flanged tubing. It is manufactured from Tefzel (ETFE) offering excellent solvent resistance. This reusable ferrule is included Flangeless Fitting assemblies for 1/16"OD tubing and can also be ordered as a replacement part. It also comes in blue, natural color and in a blue 10 Pack.

Flangeless Fittings

Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:

Convenience: Flangeless Fittings are easy to use. Just slip the nut and ferrule over the tubing and finger tighten the assembly into your receiving port. In tests, it is shown that the ideal amount of torque to achieve expected part performance should be approximately 3–4 in-lbs (0.34–0.45 N·m). Check out the line of special tightening tools designed to adapt to many standard torque wrenches, on page 50 and the adjustable torque driver, VHP-4000.

Minimal Down-Time: Component replacement is quick, taking only a few seconds — unlike the significant time required to flange tubing.

Cost-Effectiveness: Repairing a flanged tubing assembly requires a costly flanging tool or the purchase of a complete replacement assembly, including a new length of tubing and a set of fittings. The Flangeless Fittings system typically requires only one new ferrule at minimal cost when repairing a connection. 

Flangeless Fittings for 1/16” and 1/8”OD Tubing

• Wide variety of materials and geometries to fit most applications
• Excellent replacement for flanged fittings
• Convenient and easy to use
• Fittings and ferrules packaged together for easy ordering convenience

Flangeless Fittings for 1/16” OD Tubing, and for 1/8” OD Tubing are available in a variety of materials. The replacement ferrules are manufactured from inert ETFE, and are sold in a colored version or ETFE’s natural color as the N option. The smaller ferrules, XP-240x and XP-340x are designed for shallow ports. These fittings are packaged together with the ferrules in convenient 10-packs. The 1/16” version include the XP-200x ferrule, and the 1/8” verison include the XP-300x ferrule. 

Metric Flangeless Fittings

Metric Flangeless Ferrules are designed to connect 1.8, 2.0, 2.5, 3.0, or 4.0 mm OD tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16- 24 Flangeless Nuts. M6-threaded nuts are also available to connect 1/16” or 1/8” OD tubing, plus a tubing sleeve to facilitate 1.0 mm OD tubing connections. Please refer to the “Metric Connections” chart for information regarding which nuts and ferrules to use with your tubing.

METRIC CONNECTIONS CHART

Related products:

• XP-235X - Flangeless Fitting Short, PEEK, 1/4-28 Flat-Bottom for 1/16" OD Natural - 10 Pack