Upchurch Scientific Inlet Solvent Filter Select for 1/16 inch ID Tubing, 10 um, 40 mL/min, Stainless Steel, Single - A-302S

Inlet Solvent Filter Select for 1/16” ID Tubing, 10 μm, 40 mL/min, Stainless Steel - Single pack

Product Number: A-302S

Categories: Filters, Filters & Frits, Fluidic Connections, Inlet Solvent Filters

This Upchurch Scientific, IDEX Health & Science, Biotech Fluidics Inlet Solvent Filter comes with a stem and offers optimal protection by filtering solvents which prevents pump cavitation and other system component damage. It is stainless steel, disposable and easy to change without tools. It has a porosity of 10µm and is for 1/16" ID tubing. It also comes made for a 1/4-28 thread port configuration.

Available in the Following Configurations:

• A-302 - Inlet Solvent Filter with stem no Fittings, Single pack
• A-302S - Inlet Solvent Filter Select, Single pack
• A-302A - Inlet Solvent Filter with Flangeless Fittings, Single pack
• A-302AC - Inlet Solvent Filter with Flangeless Fittings, 100 per pack

Specifications:

Inlet Solvent Filters

• Large surface areas prevent pump cavitation
• Disposable
• 2 μm, 10 μm, and 20 μm pore sizes available
• General use and prep filters for higher flow applications

It is good practice to filter your solvents to prevent pump damage. Our 316 stainless steel filters provide that protection.

Because filters should be changed periodically, we make it easy to replace them without tools. For those filters using a plastic fitting, the tubing can be reconnected by finger tightening the fitting into the new filter. The filters with stems allow easy insertion into the inlet tubing.

* Maximum suggested flow rates are determined by porosity and surface area.