Manufacturers
Specials - [more]
CLEARANCE Thermo Scientific CELL DISP ACRYLIC 300-1100NM 10 mm - 331720-000
Save: 50% off
CLEARANCE Waters Sep-Pak Silica Classic Cartridge, 690 mg Sorbent per Cartridge, 55 - 105 µm, 50/pk - WAT051900
Save: 50% off
CLEARANCE Thermo Scientific Dionex IonPac SCS 1 Silica Cation Separator Column, Hydrophilic, 4.5 um, 4 mm ID x 250 mm Length, 1/Pk - 079809
Save: 30% off
CLEARANCE Thermo Scientific UltiMate TCC-3000RS/SD SST Valve Pods - 6722.9013
Save: 20% off
CLEARANCE Thermo Scientific Chromacol 10 ml Crimp Top Headspace Vials, Clear, 10-CV, 125/Pk - CC-10-CV
Save: 20% off
New Products - [more]
Shimadzu Sil-20A/Ac Xr Needle Seal Kit - 228-50452-93
MicroTight PEEK Tubing Sleeve for 0.025 inch OD Fittings, 395 um ID, Green, Single pack
Product Number: F-185X
Categories: Fittings, Fluidic Connections, MicroTight(r) Tubing Sleeves, Tubing Sleeves
This Upchurch Scientific / IDEX Health & Science / Biotech Fluidics MicroTight Tubing Sleeve assists in creating a concentric connection with minimal dead volume. Manufactured from biocompatible PEEK it offers excellent chemical resistance. This sleeve features an outer diameter of .025.
Related Products:
- F-125 - MicroTight® Nut 6-32 Coned, for MicroTight Sleeve Natural Standard
- P-775 - MicroTee Assembly .025in
- P-720 - Union Assembly MicroTight® PEEK
- P-777 - MicroCross Assembly .025in
Available in the Following Configurations:
- F-185 - Single pack
- F-185X - 10 per pack
Specifications:
| Colour | Green |
|---|---|
| Material | PEEK |
| Pressure Rating Max (psi) | 4000 |
| Pressure Rating Max (bar) | 276 |
| Tubing Sleeve OD (in) | .025 |
| Tubing Sleeve ID (in) | 0.0155 |
| For Tubing OD (µm) | 340-380 |
MicroTight® Tubing Sleeves
- Manufactured from PEEK polymer
- Pressure rated to 4,000 psi (276 bar)
- Colour-coded for easy inner diameter identification
These MicroTight Tubing Sleeves feature an outer diameter of 0.025” and offer a wide assortment of inner diameters to help facilitate capillary tubing connections with our MicroTight accessories. Because the sleeves are manufactured from PEEK polymer, they carry an upper temperature threshold of 125 ºC. To use these sleeves properly, choose a sleeve with an inner diameter 0.001”–0.002” (25–50 μm) larger than the outer diameter of your capillary tubing. Then, slip the sleeve over your flow path tubing, such that your tubing extends all the way through the sleeve, but not beyond the end of the sleeve. Choose the correct fitting that corresponds with your receiving port, slide it over the sleeved flow path tubing and connect as normal.
Full Range of Tubing Sleeves
| Part No. | Inner Diameter (ID) | For Tubing OD Size | Colour |
| MICROTIGHT PEEK TUBING SLEEVES AND KITS, 0.025” OD OD FITTINGS | |||
| F-180 | 125 μm (0.005”) | 70–110 μm | Red |
| F-181 | 180 μm (0.007”) | 125–165 μm | Yellow |
| F-182 | 230 μm (0.009”) | 175–215 μm | Natural |
| F-183 | 280 μm (0.011”) | 225–265 μm | Blue |
| F-184 | 330 μm (0.013”) | 275–315 μm | Orange |
| F-185 | 395 μm (0.0155”) | 340–380 μm | Green |
| F-186 | 455 μm (0.018”) | 400–440 μm | Black |
| F-187 | 535 μm (0.021”) | 480–520 μm | Natural |
| F-188 | 152 μm (0.006”) | 95–135 μm | Purple |
| 1328 | MicroTight Tubing Sleeve Kit, contains (6) each of the sleeve sizes listed above | - | - |
| 1356 | MicroTight Connector Kit, contains: a 10-pack of each MicroTight Tubing Sleeve (F-180–F-187); (2) P-770 - MicroTight Adapters; and (2) MicroTight P-720 Unions | - | - |
| NANOTIGHT FEP TUBING SLEEVES, 1/16” OD OD FITTINGS | |||
| F-237 | 125 μm (0.005”) | 70–110 μm | Red |
| F-238 | 180 μm (0.007”) | 125–165 μm | Yellow |
| F-239 | 215 μm (0.0085”) | 160–200 μm | Natural |
| F-240 | 280 μm (0.011”) | 225–265 μm | Blue |
| F-241 | 330 μm (0.013”) | 275–315 μm | Orange |
| F-242 | 395 μm (0.0155”) | 340–380 μm | Green |
| F-243 | 455 μm (0.018”) | 400–440 μm | Black |
| F-244 | 535 μm (0.021”) | 480–520 μm | Natural |
| F-245 | 610 μm (0.024”) | 555–595 μm | Red |
| F-246 | 685 μm (0.027”) | 630–670 μm | Yellow |
| F-247 | 840 μm (0.033”) | 785–825 μm | Green |
| F-252 | 1.07 mm (0.042”) | 1 mm | Purple |
| PEEK TUBING SLEEVES FOR 1/16” OD FITTINGS | |||
| F-225 | 125 μm (0.005”) | 70–110 μm | Red |
| F-226 | 180 μm (0.007”) | 125–165 μm | Yellow |
| F-227 | 230 μm (0.009”) | 175–215 μm | Yellow |
| F-228 | 250 μm (0.011”) | 225–265 μm | Blue |
| F-229 | 330 μm (0.013”) | 275–315 μm | Natural |
| F-230 | 405 μm (0.016”) | 350–390 μm | Orange |
| F-231 | 560 μm (0.022”) | 505–545 μm | Natural |
| F-232 | 785 μm (0.031”) | 730–770 μm | Natural |
| F-233 | 865 μm (0.034”) | 785–825 μm | Blue |
| F-234 | 685 μm (0.027”) 630–670 | 630–670 μm | Yellow |
| PEEK TUBING SLEEVES FOR 1/32” OD FITTINGS | |||
| F-381 | 180 μm (0.007”) | 125–165 μm | Yellow |
| F-382 | 205 μm (0.008”) | 150–190 μm | Natural |
| F-384 | 255 μm (0.010”) | 200–240 μm | Blue |
| F-385 | 380 μm (0.015”) | 325–365 μm | Natural |
| F-386 | 510 μm (0.020”) | 455–495 μm | Orange |
| F-387 | 250 μm (0.011”) | 225–265 μm | Red |
| F-388 | 330 μm (0.013”) | 275–315 μm | Black |
| FEP TUBING SLEEVES FOR 1/32” OD FITTINGS | |||
| F-374 | 280 μm (0.011”) | 225–265 μm | Blue |
| F-375 | 330 μm (0.013”) | 275–315 μm | Orange |
| F-376 | 395 μm (0.0155”) | 340–380 μm | Green |
- Model: F-185X
- Manufactured by: Upchurch Scientific
We Accept ...
Secure ways to pay by credit card or with a PayPal account
Featured - [more]
LNI SWISSGAS NG CASTORE XL iQ Membrane Nitrogen generator with SCROLL compressor integrated
LNI SWISSGAS SILENTO-S Vacuum Pump Noise Reduction System - 2000.00.060
LNI SWISSGAS HG PRO PEM Hydrogen generator
Agilent 6520 Q-TOF for Sale
Latest News [View All]
Have you seen ...
