Filters and Mobile Phase Filters
UHPLC Stainless Steel In-Line Filter, 0.25 mm Bore, 0.5 µm
- UHPLC (up to 1000 bar / 14,500 psi)
- Minimized hold-up volume
- Two bores for analytical and semi-prep flow rates
- Three porosity options
The stainless steel in-line filter has virtually no hold-up volume and can be used in various applications without significant band broadening or loss of efficiency.
The 0.25 mm bore versions are intended for analytical use between autosampler/injection valve and column. The 0.75 mm bore versions are suitable for higher flow rates in semi-prep systems or for solvent supply from pump to autosampler.
With minimal dead volume and available frit porosities of 0.5, 2 or 5 µm, these in-line filters are the ideal column protectors.
Bore size | Pore size | Internal volume * | Product No. |
---|---|---|---|
0.25 mm | 0.5 µm | 0.2 µL | JR-68230-05 |
2 µm | 0.3 µL | JR-68230-2 | |
5 µm | 0.3 µL | JR-68230-5 | |
0.75 mm | 0.5 µm | 1.7 µL | JR-68231-05 |
2 µm | 1.9 µL | JR-68231-2 | |
5 µm | 1.9 µL | JR-68231-5 |
* The internal volume is the total flushed volume between the ends of the connecting tubes, including the frit volume.
Replacement frits
Bore size | Pore size | Frit volume | Qty/ pkg | Product No. |
---|---|---|---|---|
0.25 mm | 0.5 µm | 0.13 µL | 5 | JR-1110-05P-5 |
2 µm | 0.18 µL | 5 | JR-1110-2P-5 | |
5 µm | 0.20 µL | 5 | JR-1110-5P-5 | |
0.75 mm | 0.5 µm | 0.55 µL | 5 | JR-1111-05P-5 |
2 µm | 0.74 µL | 5 | JR-1111-2P-5 | |
5 µm | 0.80 µL | 5 | JR-1111-5P-5 | |
10 µm | 0.87 µL | 5 | JR-1111-10P-5 |
SPECIFICATIONS
- Materials:
Body 316 stainless steel Frit PEEK-encased 316 stainless - 0.25 or 0.75 mm bore
- 10-32 female to 10-32 male threads
- Pressure rating
<1000 bar (< 14,500 psi)
- Model: JR-68230-05
- Manufactured by: VICI Jour