VICI Jour Plug, 360 µm Fittings for PEEK or Fused Silica Tubing, < 10K psi - JR-C360PPK

Vici's high pressure fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without the use of liners. The ferrule snaps into the nut so that the fitting is "one-piece", but the ferrule remains free to rotate as the nut is tightened so that the tube doesn't twist. Because of the compact size and fine 2-56 threads, a leak-free connection that seals at pressures in excess of 20,000 psi can be easily formed with the available manual tool.

Tees and crosses for PEEK or FS tubing offer a choice of three bore sizes, and feature a "quick mount" base with adhesive backing to make sure that the fitting is stable and fragile tubing doesn't get broken. There is also a quick-mount PEEK union.

These fittings are constructed from premium grade natural PEEK material. They are intended for use with PEEK or fused silica tubing at pressures up to 10,000 psi, or the maximum pressure for which the tubing is rated, whichever is lower. Quick-mount versions have an integral base with double-stick tape to secure fittings to a surface.

SPECIFICATIONS

• For 360 µm PEEK or FS tubing
• Material: PEEK
• Pressure rating:
  <689.5 bar (10,000 psi)
  (Varies with tubing material and ID)

Description		Bore	Product No.
Nut/ferrule		—	JR-C360NFPK
Cap		—	JR-C360CPK
Plug		—	JR-C360PPK
Union, quick mount		50 micron	JR-C360QUPK2
		100 micron	JR-C36Q0UPK4
		150 micron	JR-C360QUPK6
Union		50 micron	JR-C360UPK2
		100 micron	JR-C360UPK4
		150 micron	JR-C360UPK6
Reducing union, 1/16" to 360 µm		100 micron	JR-C360RU1PK6
Tee, quick mount		50 micron	JR-C360QTPK2
		100 micron	JR-C36Q0TPK4
		150 micron	JR-C360QTPK6
Cross, quick mount		50 micron	JR-C360QXPK2
		100 micron	JR-C36Q0XPK4
		150 micron	JR-C360QXPK6
Tightening tool		—	JR-C360ET