Waters HPLC Spare Parts

Oriented Plunger PerfomancePLUS Waters Part Number: WAT271067 / WAT270959, Old Part Number: WAT270488 For use with the Following Models: 2690, 2695, 2790, 2795, 2796, 2690D, 2695D and Alliance®

The Outlet Check Valve Housing is for the spring loaded outlet check valve. Specifications PM Kit No Part Category Mechanical Product Category Pumps Products 510 HPLC Pump Replacement Schedule As Needed  

The Outlet Check Valve is replaced when it is leaking or there are pressure fluctuations in the pump heads. (If pressure is generated as the plunger comes forward and then falls back abruptly as the plunger moves back, the problem is due to the...

This spare part is a genuine Waters Quality Part Specifications PM Kit No Part Category Fittings Product Category Acquity Products ACQUITY UPLC High Temperature Column Heater ; ACQUITY UPLC Column Heater Module; ACQUITY...

PerformancePLUS Autosampler Needle Waters Part Number: 700001247 The PerformancePLUS Autosampler Needle is made of corrosion resistant nickel/cobalt alloy (MP35N). These needles are much less prone to etching by acids; therefore they may absorb...

The PerformancePLUS™ Check Valve Cartridges are used with pumps that have the PerformancePLUS Cartridge Check Valve System installed. The PerformancePLUS Cartridge Check Valve System can be used as either an inlet or outlet valve in the Waters...

PerformancePLUS Check Valve Housing, 2/pk Waters Part Number: 700002332 This spare part is a Waters Quality part Specifications: UNSPSC 41115854 Brand Waters Quality Parts Product Type Spare Parts Kits Units per Package 2 pk ...

All the parts necessary to rebuild both the 616 or 626 pump heads are contained in the Plunger Wash and Seal Rebuild kit. The kit contains the following parts: two plunger seals, two plunger wash seals, two retainer seal o-rings, two pkgs plunger...

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances minimize the wear of the plunger seal, while alignment of the plunger within its stainless steel holder...

The Plunger Seal Wash Kit (100µL) contains the following components: one wash seal insert tool, three polypropylene 1/16 in. tee, six adapter fittings, one plunger wash seal 100µL, two retaining rings, one PTFE® tube (10ft). ...