SepaFlash™ HP Series
Santai Technologies SepaFlash HP Fusion Series Spin-welded cartridge 4 g, High-efficiency irregular silica 25-40 µm, 60 Å, MP 400 psi, pk 120
surface area 500 m2/g, pH 6.5-7.5, water content≤6% (Spin-welded column format)
Product Number: SW-5102-004_120
Column Specifications:
| Item Number: |
SW-5102-004_120 |
120 per pack |
SW-5102-004_24 |
24 per pack |
| Column Size |
4g |
| Quantity per box |
120 |
| Sample Size |
4 mg–0.6 g |
| Flow Rate (ml/min) |
15–30 |
| Cartridge Length (mm) |
113.8 |
| Cartridge ID (mm) |
12.4 |
| Max pressure (psi/bar) |
400/27.5 |
Flash Column
Product Advantages
SepaFlash™ columns are excellent alternatives to other flash columns available on the market as they offer the following advantages:
- Low fines; Neutral pH; 100% guaranteed leak-free
- Clean, pre-packed, pharmaceutical-grade polypropylene cartridges
- Made with ultra-pure silica gel (we can pack your own source)
- Tight particle-size distribution to avoid leaching and/or channelling, no tailing
- Water activity and controlled water content for silica
- Innovative and semi-automated packing technology
- Five series available(Standar Series, E series, HP Series, Bonded Series and iLOK Series)
- "lot-to-lot" reproducibility since 2004
100% COMPATIBILITY with other instruments
- Teledyne Isco (CombiFlash : Rf, Companion™, RETRIEVE™, OptiX™)
- Biotage (IsoleraTM, SP, Flash, FlashMaster II)
- Analogix (Varian) (IntelliFlash 310 and 280, SimpliFlash, F12/40)
- Interchim (puriFlashTM 430evo)
- Grace (Reveleris™ System)
- Armen (Spot Flash System)
- Moritex (Purif-α2, Purif-compact)
- Yamazen (Smart Flash EPCLC W-Prep 2XY)
- BUCHI (Sepacore™)
SepaFlash™ HP Series
HP series flash columns are spin-welded and allow for higher pressure up to 400 psi, the available adapter facilitates offer compatibility with any flash system on the market.
- Fusion series - High resolution, more economical and solvent saving
- Platinum series - Better consistency and repeatability, low back pressure, high resolution
- Ruby series - Larger loading volume, less solvent usage, higher degree of separation
HP series flash columns are spin-welded and allow for higher pressure up to 400 psi, the available adapter facilitates offer compatibility with any flash system on the market. This series provides Luer-Lok in and Luer-Lok out flexibility for convenient column stacking. When pre-packed high-efficiency silica gel (irregular, 25-40 µm, 60 Å; spherical, 20-45 µm, 70 Å), this series presents an outstanding resolution over conventional flash cartridges.
- Solid, one-piece polypropylene body with thick walls for safety;
- Freely choose irregular silica or spherical silica according to your personal preference;
- Markedly improved resolution and high load ability;
- Spherical silica provides improved performance without increasing the back pressure.
Click for additional Santai Technologies Products:
