SepaFlash™ iLOK™ Series
Santai Technologies SepaFlash cartridge 25 g, iLOK Series, pre-packed, UltraPure irregular silica, 40−63 µm, 60 Å, MP 200 psi, pk 80
surface area 500 m2 /g, pH 6.5–7.5, loading capacity 0.1–10%
Product Number: SD-5101-025_80
Column Specifications:
| Item Number: |
SD-5101-025_20 |
20 per pack |
SD-5101-025_80 |
80 per pack |
| Column Size: |
25 g |
| Sample Size: |
25 mg–2.5 g |
| Flow Rate (mL/min): |
30–60 |
| Cartridge Length (mm): |
188.2 |
| Cartridge ID (mm): |
21.6 |
| Max. Pressure (psi/bar): |
200/13.8 |
SepaFlash™ Flash Columns
Product Advantages
SepaFlash™ columns are excellent alternatives to other flash columns available on the market as they offer the following advantages:
- Low fines; Neutral pH; 100% guaranteed leak-free
- Clean, pre-packed, pharmaceutical-grade polypropylene cartridges
- Made with ultra-pure silica gel (we can pack your own source)
- Tight particle-size distribution to avoid leaching and/or channelling, no tailing
- Water activity and controlled water content for silica
- Innovative and semi-automated packing technology
- Five series available(Standar Series, E series, HP Series, Bonded Series and iLOK Series)
- "lot-to-lot" reproducibility since 2004
100% COMPATIBILITY with other instruments
- Teledyne Isco (CombiFlash : Rf, Companion™, RETRIEVE™, OptiX™)
- Biotage (IsoleraTM, SP, Flash, FlashMaster II)
- Analogix (Varian) (IntelliFlash 310 and 280, SimpliFlash, F12/40)
- Interchim (puriFlashTM 430evo)
- Grace (Reveleris™ System)
- Armen (Spot Flash System)
- Moritex (Purif-α2, Purif-compact)
- Yamazen (Smart Flash EPCLC W-Prep 2XY)
- BUCHI (Sepacore™)
iLOK™ Series
SepaFlash® iLOK® flash cartridges offer users convenience for manual assembly, allowing for a flexible sample loading method: solid load and direct liquid injection. The series is offered in three formats: iLOK® flash cartridge pre-packed with UltraPure silica gel, iLOK®_ SL cartridge which is pre-packed with 85% column volume of silica ge and iLOK® empty solid load cartridge comes with screw cap, frits, disbursing unit, O-ring and end tips.
- Innovative column design enables the user with convenient manual assembly and column stacking
- Available in a wide range of cartridge sizes for different sample loading requirements
- Reinforced cartridge body with maximum operating pressure up to 200 psi
Optional accessories and bulk silica gel - See below
iLOK® empty solid load cartridge with screw cap, frits, disbursing unit, O-ring and end tips with optional bulk silica gel.
Additional Santai Technologies Products:
