LEEC FC1 Drying Cabinet with Hinged Doors, Circulating Fan, 1000 Litre - FC1

Drying Cabinets

LEEC FC1 Drying Cabinet with Hinged Doors, Circulating Fan, 1000 Litre

Product Number: FC1

Features:

• Dry laboratory glassware, surgical instruments, wigs/costumes, media, PCB's
• Four sizes with hinged glass doors
• Two sizes with sliding glass doors
• 5mm thick, clear, toughened glass doors (BS EN 12150)
• Fan models available

LEEC drying cabinets are made from rust-resistant steel which is finished in white polyester powder coat paint as standard. They have heatproof toughened glass doors to British Standards. The shelves are removable and can be adjusted in height every 25mm. Heating elements are waterproof and are located underneath a perforated floor, which is finished in unpainted, polished stainless steel. Temperature control is by Simmerstat giving any desired temperature up to a maximum of 50°C above ambient temperature.

Drying at a lower temperature than a laboratory oven, these units can be used in pharmaceutical/cosmetic manufacturing, the food testing industry, automotive and aerospace industries, and electronics (PCB) manufacturing, as well as science labs in schools, colleges and universities. They are also ideal for drying theatrical wigs and costumes and are popular with theatrical production companies, film/TV show producers. They are often referred to as "wig dryers" or a "wig dryer" and they can hold several head blocks.

The standard "natural convection" drying cabinets are supplied with a sliding stainless steel shutter on top for ventilation. LEEC drying cabinets are also available with a circulation fan or extract fan. A circulating fan gives a better drying performance. The air is drawn upwards through the body of the cabinet and returned via a full-width air duct to the heaters in the base. Where an extractor fan for exhausting moisture to outside the building is fitted, the fan will be located in a chimney which adds approximately 200mm to the overall cabinet height and terminates in a 100mm diameter spigot.

Note: The FCX1 model is a combined circulating / extractor system. A butterfly valve system adjusts the proportion of air circulated or exhausted by a single, more powerful fan unit.

Both of the smaller drying cabinets (LS/SS) are made of steel and are finished in white powder coated paint with heatproof toughened glass sliding doors. The perforated floor is finished in unpainted, polished stainless steel.

Three wire shelves (included) are removable and can be adjusted for height every 19mm. Temperature control is by Simmerstat giving any desired heat up to a maximum of 50°C above ambient temperature.

Both models have fixing holes in the back to allow for wall mounted if desired.

Specifications 1000 Litre Range:

LEEC Drying Cabinets are made to order. LEEC prides itself on being able to deliver exactly what the customer wants and can produce a Humidity Cabinet that is tailored to meet a specific need. Below are the options which are available on the LEEC Drying Cabinet range:

Additional Options:

• SD - Solid aluminium doors, white painted (instead of glass).
• L11 - Spare mesh shelf and brackets for F1, FX1, B1 and BX1 models.
• L12 - Spare mesh shelf and brackets for FC1, FCX1 and BC1 models.
• L13 - Spare mesh shelf and brackets for F2, FX2, B2 and BX2 models.
• L14 - Spare mesh shelf and brackets for FC2 and BC2 models.
• L15 - Spare mesh shelf and brackets for models LS.