ZA TOTAL C HP Zero Air generator with compressor integrated
AirGen
ZA TOTAL C HP series : Ultra zero AIR generator with integrated compressor - HC removal < 0.05 ppm / CO2 <1ppm / dewpoint < -70°C
Available in the Following Configurations:
- ZA TOTAL C 1.5 HP - Zero Air Generator 1.5 L/min HC/CO2/Moisture removal with integrated compressor
- ZA TOTAL C 3.0 HP - Zero Air Generator 3.0 L/min HC/CO2/Moisture removal with integrated compressor
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2.
ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free.
The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium, the Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil and other components are removed with an active charcoal filter.
Product features:
- Easy use and quick installation
- Flow rate up to 3 L/min
- Pressure up to 6 bar (87 psi)
- RS 485 and RS 232 as standard
- Purity: < 0.05 ppm THC | < 0.05 ppm CO NOx SO2 | < 0.1 ppm CO2
- Low maintenance
- Reduced foot print
Main Applications:
- TOC
- GC-FID
- GC-NPD
- GC-FPD
- GC-PFPD
- THA
- Gas sensing
Options:
Available Consumables:
Technical Specifications:
Models: ZA TOTAL C HP | 1.5 | 3.0 |
Zero Air outlet | ||
Flow rate (Max) | 1.5 l/min | 3.0 l/min |
Outlet pressure (Max) | 6 bars (87 psi) | |
Total hydrocarbon | < 0.05ppm | |
Total CO NOx SO2 | < 0.05 ppm | |
Total CO2 | < 0.1 ppm | |
Dewpoint *1 | < -75°C (- 103 °F) | |
Communication | ||
RS485 | Standard | |
RS232 | Standard | |
General data | ||
Supply voltage | 100-115 Vac (±10%) 50/60 Hz or 220-240Vac (±10%) 50/60 Hz |
|
Connection type | IEC320-C14 | |
Nominal power (Max) | 1000W | |
Fuse rating (5x20mm) | 10A (250 Vac – T) | |
Dimensions (W x D x H) | 43 x 75 x 68 cm | |
Net weight | 95 kg | |
Connections | ||
Outlet port | 1/4" female BSPP | |
Operating/storage conditions | ||
Operating temperature | 5-35°C (41-95°F) | |
Storage temperature | 1-50°C (34-122°F) | |
Humidity (Max, non condensing) | 80% [5-35°C (41-95°F)] | |
Noise | < 52 dB(A) | |
IP rating | IP20 |
*1 Atmospheric Dew Point (ADP)
- Model: ZA TOTAL C HP
- Manufactured by: LNI SWISSGAS