Biotech Systec ZHCR (Zero Hysteresis / Constant Run) Degasser Analytical Vacuum Pump, bottom mounted, 3 at 6.7 kPa Vacuum
Product Number: 9000-1471
Replaces Part Numbers: 9000-1130 / 9000-1295 / 9000-1023 / 9000-1067 / 9000-0875
You need 2 straight tubing reducers from 1/8" to 1/16" to fit 1/8" connector on 9000-1471
The Systec ZHCR (Zero Hysteresis / Constant Run) Analytical vacuum pump is designed for membrane degassing of the HPLC mobile phase. Employing a patented closedloop, micro-stepping, RPM control-strategy permits the pump to run with continuously variable speed, providing quick pull-down at high RPM, and then sustaining a consistent vacuum level at low RPM.
- Patented control eliminates baseline fluctuations
- Inert flow path
- 5+ year lifetime
- Built-in anti-backflow check valves
- Compact
Fluctuations in detector baseline due to changes in vacuum level are eliminated by not having to repeatedly stop and start a single-speed pump. This also greatly reduces wear and noise. The brushless motor enables quiet operation and is appropriate for environments where solvent vapors may be present. Flowpaths are entirely inert and the continuously purged head design allows the pump to start into a full vacuum – vacuum will not be released in the event of a power loss.
SPECIFICATIONS:
Air Flow (no vacuum): | 650 SCCM @ 400 RPM; 45 SCCM @ 60 RPM |
Vacuum Level: | <1minute (with 4 MINI degassing channels, 50cc total internal chamber volume) |
Pump Head Continuous Purge Air Flow Rate: | 1 SCCM, Primary; 9 SCCM, Secondary |
Wetted Materials: | Polypropylene, PTFE, EPDM, Rubber |
Noise: | <52 dB (@ 50dB ambient) |
Expected Lifetime: | >5 years (Continuous run @ 60 RPM) |
- Model: 9000-1471
- Manufactured by: Biotech