Biotech Isolation Technologies Column Tube for Accel-X Column System, 3 cm Length x 3.0 mm ID - 2001-05030-003EP

Accel-X™ Column Systems

Biotech Isolation Technologies Column Tube for Accel-X Column System - 3cm Length x 3mm ID

Accel-X Clmn Tube

Product Number: 2001-05030-003EP

• Engineered for high throughput applications
• Columns can withstand pressures up to 15,000 psi (1,034 bar)
• IsoBore™ tubing finish provides twice the smoothness of standard LC grade
• 80% less dead volume for enhanced sensitivity
• Ideal for ballistic gradients

Short length and narrow inner diameter make Accel-X columns ideally suited for the high-speed separations and ballistic gradients commonly used in LC/MS. Near-zero-dead-volume fittings permit Accel-X columns to achieve high efficiency and excellent peak shape. To take advantage of the high efficiency and high speed of the Accel-X LC/MS columns, it is essential to use 0.005 inch inner diameter capillary tubing between the injector and the column and the column and the detector (or LC/MS interface). This ensures minimal band broadening (sample dilution) for sharper, more efficient peaks and lower detection levels. Reducing the tubing volume (length and inner diameter) also maintains the integrity of fast gradients. By using Sure-fit connectors, you can reduce the potential of a poor connection that will degrade peak shape.

Isolation Technologies is now part of IDEX Health & Science and Biotech Fluidics.