Biotech Isolation Technologies Isobore LC Column Tube for Compression Column System, 15 cm Length x 3.0 mm ID, 1/4 inch OD - 101-04030-015EP

Compression Column Systems

Biotech Isolation Technologies LC Column Tube 3.0mm ID x 1/4" OD 15cm

(EP Blank 1/4in X 3mm X 15cm)

Product Number: 101-04030-015EP

Please Note: Compression Systems are available in custom IDs and lengths — almost any size is possible. Contact us for more details.

• Multiple port configurations make columns easy to use with any system
• Leak-free frits improve system efficiency
• Operates at pressures up to 10,000 psi (689 bar)
• Isobore™ surface finish reduces drag at the column wall and improves column efficiency and performance by providing an extremely smooth, flat, and clean surface; it also features a surface finish with typical values around 8 µin.

These LC Column Tubes are designed with a specificity for HPLC applications and have a history of unmatched performance and consistency. All stainless steel tubing is made from 316 grade stainless steel and subject to rigorous quality inspection. It comes in lengths of 3cm - 30cm.

Compression hardware relies on the ferrule to swage or attach to the tubing to maintain the high pressure seal. The word “compression” is associated with this style of hardware because the swaging is achieved by physically compressing the ferrule onto the tubing by applying torque. Isolation Technologies compression systems ensure that the ferrule is properly seated on the tube and locked in place so that it does not slip off during the high-pressure packing process. Proper assembly of the tube and frit within the end fitting ensures the integrity of the flow path — improper assembly can lead to poor chromatography or loss of packing material. Compression Columns are available in custom IDs and lengths — many sizes are available. Isolation Technologies frits for compression columns are encapsulated in a PEEK™ ring, reducing the potential for leaks and silica bypass.

Isolation Technologies compression systems ensure that the ferrule is properly seated on the tube and locked in place so that it does not slip off during the high-pressure packing process. Proper assembly of the tube and frit within the end fitting ensures the integrity of the flow path. Improper assembly can lead to poor chromatography or loss of packing material.

Compression column tubing is available in Isoboregrade. Featuring a surface finish (Ra) of <15 µinch with typical values around 8 µinch. This highly polished tubing is recommended for use with 5 µm packing materials (and smaller) and with small internal diameter columns (<3.0 mm inner diameter).

Isolation Technologies compression systems come with a PEEK encapsulated frit, reducing the potential for leaks and silica bypass.

• Internal Diameters (mm): 1.0, 2.1, 3.0, 4.0, 4.6, 7.8, 9.4, 10.0
• Lengths (mm): 33, 50, 75, 100, 125, 150, 200, 250, 300

Isolation Technologies is now part of IDEX Health & Science and Biotech Fluidics.

Specifications: