CTS Sciencix Rotor Seal & Pod Repair Kit, 3-Pin Vent, for Waters Injector Pod/Cartridge - CTS-22364 (OEM 700002660, 289001877)

CTS Sciencix Rotor Seal & Pod Repair Kit, 3-Pin Vent, for Waters Injector Pod/Cartridge (700002660, 289001877) *Injector Valve Cartridge not included

Sciencix Part Number: CTS-22364
Equivalent to OEM Part Numbers: 700002660, 289001877

This rotor seal is designed to be compatible in Waters® ACQUITY UPLC® Sample manager, ACQUITY® BSM injector pods.

OEM: Waters®
Model: ACQUITY® BSM, ACQUITY® UPLC® Sample Mgr

Operating Specifications

• Pressure: 15000 psi/1000 bar
• Ambient Range: 4ºC - 55ºC
• pH Range: 0-10

Wetted Materials

• Vespel®
• 316 SS

Replacement Frequency

The rotor seal generally is not part of a required maintenance protocol. Indications that the rotor may need to be replaced are poor reproducibility of injection volume or a leak at the injection valve.

Installation Information

Sciencix parts are designed to be compatible and interchangeable with OEM parts. Please see instrument service manual for proper removal and installation procedure.

Operating Recommendations

The typical cause of failure at the rotor seal is wear of the Vespel® material. A major cause of wear is the use of buffered mobile phases. To help improve the lifetime of the rotor seal it is recommended that the system and injection valve be flushed with either the mobile phase without the buffer addition or with an aqueous solution. Be sure to toggle the valve through both the bypass and inject positions to flush all of the mobile phase salts from the injection port.