CTS Sciencix Rotor Seal & Pod Repair Kit, Vespel, 3-Groove, 2 pin for ACQUITY Everflow Injector Pod/Cartridge - 11-4134

Rotor Seal & Pod Repair Kit, Vespel®, 3-Groove, 2 pin for ACQUITY® Everflow Injector Pod/Cartridge (700002765, 700005236, 700006057 & 700006069) *Injector Valve Cartridge not included

Sciencix Part Number: 11-4134

This rotor seal is designed to be compatible with Waters® Acquity®, Acquity UPLC® Sample Mgr UHPLC systems and 700002765 Acquity® injector pod.

Compatibility

Waters® | ACQUITY® UPLC® Sample Mgr, ACQUITY® H-Class FTN, ACQUITY® I-Class FTN, ACQUITY® I-Class FL, ACQUITY® Arc™ FTN-R

Operating Specifications

• Pressure: 17000 psi/1200 bar
• Ambient Range: 4ºC - 55ºC
• pH Range: 0-10

Wetted Materials

Vespel®

Replacement Frequency

The rotor seal generally is not part of a required maintenance protocol. Indications that the rotor may need to be replaced are poor reproducibility of injection volume or a leak at the injection valve.

Installation Information

Sciencix parts are designed to be compatible and interchangeable with OEM parts. Please see instrument service manual for proper removal and installation procedure.

Operating Recommendations

The typical cause of failure at the rotor seal is wear of the Vespel® material. A major cause of wear is the use of buffered mobile phases. To help improve the lifetime of the rotor seal it is recommended that the system and injection valve be flushed with either the mobile phase without the buffer addition or with an aqueous solution. Be sure to toggle the valve through both the bypass and inject positions to flush all of the mobile phase salts from the injection port.