Inertsil ODS-4
GL Sciences Cartridge Guard Column Replacement for UHPLC, 2 μm, 100 Å, 3 x 10 mm, 2/Pk
Product Number: 5020-20343
Inertsil
Inertsil columns were developed by GL Sciences in 1986 for sample separations using high-performance liquid chromatography. Starting with Inertsil ODS, a new type of bonded silica was produced providing unmatched performance and reproducibility. Further refinements of evolved silica and the introduction of new phases have allowed Inertsil to achieve industry leading performance for analyte separation to become one of the most highly used columns for HPLC.
Features
- High inertness — Inertsil columns feature sophisticated surface treatment to provide exceptionally low interference of analyte by surface silanols.
- Extremely low operating back pressure — new surface silica technology allows for the production of particles with a high degree of uniform size, shape, and distribution which vastly lowers the operating back pressure, allowing for long column service life.
- High reproducibility — produced exclusively in GL Sciences' in-house facilities with a high level of quality control, Inertsil columns are guaranteed to provide excellent reproducibility of results from lot-to-lot.
Reversed Phase Columns (C18 Column) - Inertsil ODS-4 Analytical Columns
Inertsil ODS-4 delivers the same extreme inertness to any type of compounds just like InertSustain C18 along with unprecedented stability under 100 % aqueous mobile phases for qualitative and quantitative analysis. However, as the base silica gel and carbon loading are different on Inertsil ODS-4, differences in selectivity can be observed for certain analytes.
Guard Columns for UHPLC
Guard Columns for UHPLC are high pressure (80 MPa) guard columns that can be used to protect particulate-packed columns during high-speed analysis. Cartridge-type guard columns with replaceable contents. are available. Tubing is pre-fixed on the column connection side of the holder in order to minimize dead volume. If you want to minimize the volume of the guard column in high-throughput analysis, a guard column
for UHPLC with an inner diameter of 1.5 mm is also effective.
Inertsil ODS-4 Guard Columns for UHPLC
Length (mm) | I.D. (mm) | Replacement Cartridge Guard Column (2 pcs) | Cartridge Guard Column (2 pcs) + Holder (1 pcs) set | ||
2 μm | 3 μm | 2 μm | 3 μm | ||
10 | 1.5 | 5020-20309 | 5020-20300 | 5020-20360 | 5020-20351 |
2.1 | 5020-20326 | 5020-20317 | 5020-20377 | 5020-20368 | |
3.0 | 5020-20343 | 5020-20334 | 5020-20394 | 5020-20385 | |
Holder for UHPLC Guard Column: | 5020-08630 |
Specifications:
Description | Inertsil ODS-4 Cartridge Guard Column for UHPLC, 2 µm, 10 x 3.0 mm, 2/Pk |
---|---|
Quantity | 2 Stk |
Manufacturer | GL Sciences |
Brand | Inertsil |
Base Material | 3 Series High Purity Silica Gel |
Product Type | (U)HPLC Guard Cartridges |
Length | 10 mm |
Inner Diameter | 3.0 mm |
Particle Size | 2 µm |
Chemistry | C18 (RP-18, ODS, Octadecyl) |
Chemistry Producers Term | ODS-4 |
Pore Size | 100 Å (10 nm) |
Max Operating Pressure | 20 MPa (200 bar) |
Carbon loading | 11.0% |
Pore volume | 1.05 mL/g |
USP Class | L1 |
Bet Surface Area | 450 m2/g |
Hardware Type | Cartridges |
Mode of Separation | Reversed Phase Chromatography (RP) |
With Holder | No |
Technology | Ultra-High Performance Liquid Chromatography - U(H)PLC |
Matrix | Silica |
Particle Morphology | spherical, fully porous |
- Model: 5020-20343
- Manufactured by: GL Sciences