The 800 series syringes are the reinforced plunger version of the original 700 series syringes. Attached to the flange of the syringe is a blue Syringe Holder. The Syringe Holder provides a spot to hold the syringe that will not heat up the barrel causing dispense inaccuracies. Additionally it provides support to small volume plungers that are prone to bending during injection. This series of syringes is ideal for dispensing volumes from 0.5 μL up to 500 μL. A variety of different terminations and needle options are available in this series.
Product Specifications
Volume | 100 µL |
Syringe Type | MICROLITER |
Syringe Series | 800 |
Termination | N |
Needle | Cemented Needle |
Gauge | 22s gauge |
Length | 2 inch (51 mm) |
Point Style | 2 |
Std. Needle Dead Volume | 0.90 µL |
Needle Inner Diameter | 0.0059 inches (0.15 mm) |
Needle Outer Diameter | 0.0283 inches (0.72 mm) |
Barrel Inner Diameter | 0.061 inches (1.46 mm) |
Barrel Outer Diameter | 0.305 inches (7.75 mm) |
Autoclavable | No |
Fluid Path | SST, Borosilicate glass |
Gas Sterilized | Yes |
Maximum Pressure | 2000 psig (137.9 bar) |
Maximum Temperature | 50 °C / 122 °F |
Minimum Temperature | 10 °C / 50 °F |
Sales Quantity | 1 syringe per pack |
- Model: 84858
- Manufactured by: Hamilton