Miles Scientific Analtech Brand Silica Gel HF (Binder-free adsorbent, Fluorescent indicator UV254) TLC Plates, with 1% Potassium Oxalate, 250 um, 5 x 20 cm, 25/Pk - P87031

Glass-backed Analytical TLC Plates

Miles Scientific Analtech Brand Silica Gel HF TLC Plates, with 1% Potassium Oxalate (with Fluorescent indicator UV254) - Glass-backed - 5x20cm - 25 plates per box

Product Number: P87031

Weight: 3.10 LBS

H - Binder-free adsorbent

F - Fluorescent indicator UV254. (Can be added to any adsorbent.)

Potassium Oxalate (1%) Modified Silica Gel H & HF UNIPLATES™

Prepared with 1% potassium oxalate during slurry preparation, these plates acquire a separation characteristic which aids in the discrimination of polyphosphoinositides.

Analtech Brand Silica Gel H / HF TLC Plates

• Silica Pore: 60Å
• Silica Particle Size: 19 μm average
• Binder: none
• Hardness: 1-8

Acceptable Solvents:

All typical chromatography solvents (20% water max)

Visualization Techniques:

Compatible with essentially all visualization reagents, even sulfuric acid charring. Spray reagent only. Dipping not recommended.

General Description:

Very soft surface as no binder is used to adhere the layer to the glass backing. Requires extra caution during use to prevent damage to the layer, which would affect chromatography. However, it is sometimes required when the separation being run is sensitive to any materials other than silica gel in the chromatographic process. Compatible with most mobile phases except water in excess of about 20%. Dip visualization procedures not recommended, but plates do tolerate gentle spray techniques.

Silica Gel H & HF UNIPLATES™ – Binder Free

Silica Gel H & HF UNIPLATES contain no calcium sulfate binder. The adsorbent contains a small amount of colloidal silica which aids in the adherence to the glass plate.