Low Pressure Fittings
Stainless Steel Mobile Phase Filter - Helium Sparger, 1/4-28 fitting, 1/16" Tubing, 10 µm, 35 ml/min
- Ideal for helium sparging
- Three porosities
- Fitting and pipe connectors
Mobile phase filters protect your HPLC system from small particles in the mobile phase. These filters are made from 316 stainless and PEEK or PTFE, and are suitable for use with most solvents.
Helium spargers offer an inexpensive way to prepare and maintain mobile phases free of dissolved gases. Connect these spargers to a regulated supply of helium gas (0-400 ml/min) to remove dissolved gases from the mobile phase. Spargers are made from 10 micron porosity stainless steel.
Fitting type | Tubing/pipe size | Pore size | Maximum flow rate* | Product No. | |
---|---|---|---|---|---|
1/4-28 fitting | 1/16" | 2 µm | 35 ml/min | JR-367016-2 | |
10 µm | 35 ml/min | JR-367016-10 | |||
20 µm | 35 ml/min | JR-367016-20 | |||
1/8" | 2 µm | 35 ml/min | JR-367008-2 | ||
10 µm | 100 ml/min | JR-367008-10 | |||
20 µm | 120 ml/min | JR-367008-20 | |||
Pipe | 1/8" | 2 µm | 50 ml/min | JR-3675-2 | |
2 µm | 95 ml/min | JR-3678-2 | |||
25 µm | 100 ml/min | JR-3678-25 |
* Flowrate measured with methanol/water (1:1), ultrasonic degassed, helium sparging to prevent regassing.
SPECIFICATIONS
- Materials:
Body PTFE Frits PTFE/Type 316 stainless Stepped tubing connector PEEK Nut PEEK Ferrule ETFE
- Model: JR-367016-10
- Manufactured by: VICI Jour