HTA HT1000I Automatic Spectroscopy Autosampler without Peristaltic Pump, 89 Tube Capacity, 6 Removable Racks

HT1000I series Spectroscopy Autosamplers

HTA HT1000I Automatic Spectroscopy Autosampler, 89 Tube Capacity, 6 Removable Racks

ICP-OES, ICP-MS, MP-AES, Flame AAS

If the analyser already mounts a pump with a line free for probe purging, the HT1000I model is a more suitable solution. This model does not include the rinse peristaltic pump and features a lower price.

Compatible with a wide range of spectroscopy applications. It has been engineered to offer a better user experience by straight forward operations, the latest generation electronics and a rich user interface. The optimized layout allows for installation in tight spaces and you will enjoy the benefits of a short flow path.

KEY FEATURES

Straight forward process and productivity
The carousel and the arm – that holds the sample probe – rotate in order to align the first sample tube to be processed. The probe is then inserted at the programmable depth; at that point, the sample is aspirated by the analyzer through the inert flow-path. As soon as this task is completed, the probe is automatically moved to the washing port where the washing pump cleans the sample probe internally and externally in order to avoid cross contamination. HT1000I is then ready to process the next sample!

Short flow-path
We typically run with a sample transfer tube 0.5 meter shorter than that of our competitors! That leads to a shorter sample rinse time, simpler/faster cleaning step and reduced bench space occupation: expect reduced argon and power supply consumption; expect longer lifetime of consumables like the tubing, the spray chamber and the torch as the contact time with the sample (matrix) is kept on a minimum level.

Optimized layout
When you look at autosamplers, the larger it is, the more expensive it is. By surveying labs in many countries, we have sized HT1000I to offer enough sample capacity to satisfy the needs of a standard lab. Oversized instruments lead to oversized costs: at the initial purchase and during operations and at maintenance – being more expensive to care about. Therefore, choosing the correct size is the best way to optimize your total cost of ownership.

Next-generation electronics: the age of smarter autosamplers is already here
Through an encoder-driven solution, HT1000I prevents the time-based drift effect you may have experienced with other systems. A powerful ARM processor runs the HT1000I, allowing support of sophisticated algorithms – such as the automated calibration procedure, the management of external stresses and automatic recovery – while minimizing the electricity consumption.

User Interface: Keypad and Software to enable a superior user experience
HT1000I offers easy setup and operation: for line priming, end-of-session washes and setup it features an integrated keypad, while for sample processing it can be controlled by the most popular ICP and Atomic Absorption software. The four integrated LEDs offer an easy visual indication of the autosampler status and PC connectivity.

Sample carousel: designed to fit your routine
The sample carousel is organized in six racks, each of which may run a different type of sample tubes from those available. Racks are removable in order to support off-instrument sample preparation and continuous sample feeding. Furthermore, the racks are recognized so that a mismatch is not possible (e.g. putting rack #2 in the position of rack #3) to comply with the best lab practices.

COMPARE MODELS:

TECHNICAL SPECIFICATIONS

1 For PC specifications refer to “HTA Autosampler Manager” flyer
2 Without accounting sample probe