LNI SWISSGAS SONIMIX 3012/3022 Multigas calibrator with GPT, ozone & self re-generable zero air generator

SONIMIX 3012 / 3022 Multigas calibrator with GPT, ozone & self re-generable zero air generator

Available in the Following Configurations:

*Module for 4 gases Inlets (3 additional Inlets) included

The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3.

The Sonimix 3012/3022 is equipped with:

• an inlet for high concentration mixtures of diluted gases such as NO, NO2, SO2, CO, HC, BTX or mixtures of several compatible polluants in the same cylinder.
• a zero air generator composed of an internal compressor with self re-generable filters that removes moisture, O3, NOx, SO2, HC, BTX and optionally CO and CH4.
• a binary gas dilutor with two inlets (diluted gas and air), based on sonic nozzles (ISO 6145-6 standard)
• The ozone generator is regulated by UV-light feedback and compensated from the atmospheric pressure and ambient temperature variations, with alarm on the drift of UV-light as well as the circuits for the GPT.

Product features:

• Accuracy - (0,6% rel.)
• Best quality price ratio
• No maintenance nor pressurised Air cylinder with its included self re-generable zero air generator
• Sonic nozzle technology
• Remote control
• Ergonomic with LCD display

Main applications:

• Air pollution monitoring

Voltage settings:

• 6700 13 867 - Voltage 230V/50-60 Hz
• 6700 13 868 - Voltage 115V/60 Hz
• 6700 13 869 - Voltage 100V/60 Hz (not available with catalysis oven)

Options:

• 6800 12 030 - Ozone generator from 50 to 500ppb and circuit for the GPT
• 6800 08 015 - Integrated self regenerable Zero Air generator
• 6800 08 017 - Catalyser oven for CO and CH4
• 6800 10 004 - Cold filter for CO (no possible if catalytic oven)
• 6800 10 000 - Portable casing for rack 19''
• 6980 40 040 - ISO 17025 New device Additional price for ISO 17025 Calibration (10 points)

Consumables:

• 6700 13 870.6 - Set of the consumables filters for the annual maintenance Sx 3022 (2xAlumine; 2 Pura/AC)
• 6700 13 870.7 - Set of the consumables filters for the annual maintenance Sx 3012 (2x Alumine/Pura/AC)
• 3741 40 020 - Dust pump filter
• 3741 49 001 - Filter for the automatic purge V5
• 3760 00 902 - Kit of diaphragm and valves (popets) for the compressor
• 6704 06 176 - Refill for CO filter

Technical Specifications: