LNI SWISSGAS SONIMIX 4001 Ozone generator – Primary transfer standard - Sx 4001

SONIMIX 4001 Ozone generator – Primary transfer standard

Multipoint Ozone primary standard. Concentration range from 10 to 1000ppb @ 3Nl/min

Available in the Following Configurations:

• Sonimix 4001 - Multipoint Ozone primary standard. Concentration range from 10 to 1000ppb @ 3Nl/min
• Sonimix 4001 - Multipoint Ozone primary standard. Dual range. Concentration range from 10ppb to 10 ppm @ 3Nl/min + 10 ppm to 35 ppm @ 0.9 L/min

The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 L/min and 10 ppm to 35 ppm at 0.9 L/min.

The Sonimix 4001 is using pressure regulator and sonic nozzles and an ozone generator including thermostatisation and regulation by UV light photometer measurement with atmospheric pressure and temperature corrections (US EPA method of UV absorption by ozone, Beer-Lambert law). The ozone analyser is built with 1 reference UV light detectors that measure in alternance the UV intensity without any ozone and then the same UV light but through the generated ozone. With these 2 values, the processor calculates the amount of ozone generated.

Product features:

• Stable and accurate > 1% (rel.)
• Calibration with dry & wet air
• Included novel LED photodetector
• Ergonomic with LCD display

Main applications:

• Air pollution monitoring
• Laboratory (ozone transfer)

Voltage settings:

• 6700 13 867 - Voltage 230V/50-60 Hz included
• 6700 13 868 - Voltage 115V/60 Hz
• 6700 13 869 - Voltage 100V/60 Hz

Options:

• 6800 08 016 - Integrated self regenerable Zero Air generator (including compressor)

Accessories:

• 6704 00 575 - Set of tube, fittings and flowmeter for connecting the SONIMIX to the O3 analyser

Consumables :

• 3741 49 001 - Filter for the automatic purge V5
• 3741 40 020 - Dust pump filter
• 6700 13 870.7 - Set of the consumables filters for the annual maintenance Sx 3012 (2x Alumine/Pura/AC)
• 3760 00 902 - Kit of diaphragm and and valves (popets) for the compressor

Technical specifications: