SunShell C18-WP
Chromanik SunShell C18-WP HPLC/UHPLC Analytical Column, 160Å, 2.6µm, ID 2.1mm x Length 75mm, 1/Pk
Product Number: CW6951
Ideal for peptides and small proteins
SunShell column has not only an inert surface but also high stability due to deactivated silanol groups. SunShell 2.6 μm column can be used on both HPLC and UHPLC because it shows 2 times lower back presure than sub 2 μm column.
SunShell is a series of Core Shell columns giving UHPLC performance with any HPLC system, but with only 1/3 of the backpressure of sub 2µm columns. Thanks to the unique bonding technology, SunShell columns gives market leading chromatographic performance. This means symmetrical peaks, high effeciency, low bleeding and very high pH stability. SunShell columns are manufactured by Chromanik Technologies Inc. in Japan. SunShell columns are available in a wide variety of selectivities and dimensions.
- Significantly improved pH stability (pH 1.5 - 10 at up to 80 ° C)
- Up to 100 times higher loading capacity than other core shell materials
- Low back pressure, usually 30 - 200 bar!
- Maximum performance with approx. 250,000 theoretical plates / meters
- Excellent peak performance for basic, acidic and complexing analytes
- As C18, C8, phenyl, RP-Aqua, PFP, HILIC Amide and Widepore C18 / C8 / C4 available.
SunShell C18-WP (160Å)
SunShell HPLC columns are manufactured using innovative core shell particle technology that provides significantly increased column efficiency and chromatographic resolution without the high back pressure seen in sub-2 µm columns.
Features
- 2.6 µm core shell particle with 0.5 µm porous silica layer
- Provides the same high efficiency and high speed as sub-2 µm
- Less than half the backpressure of sub-2 µm
- Up to 100 times higher loading capacity compared to other core shell materials
- Improved pH stability from 1.0 to 10 (C18)
Specifications:
Brand | ChromaNik Technologies Inc. |
Column Name | SunShell C18-WP |
Column Type | HPLC / UHPLC Analytical / Microbore Column |
Mode | Reversed Phase (RP) |
Bonded phase | C18 |
Particle size | 2.6 μm |
Pore diameter | 160 Å (16 nm) |
Specific surface area | 90 m2/g |
Carbon content | 5% |
Ligand density | 2.5 μmol/m2 |
USP L line | L1 - Octadecyl silane bonded to porous silica or ceramic microparticles, 3 to 10µm in diameter. |
End-capping | Sunniest endcapping |
Maximum operating pressure *a | 60 MPa or 8,570 psi |
Available pH range | 1.5 - 10 |
Inner Diameter (I.D.) | 2.1 mm |
Length | 50 mm |
*a) Unless otherwise specified in the column test report
ChromaNik Columns Online Catalogue:
- ChromaNik SunShell Columns
- ChromaNik SunArmor Columns
- ChromaNik Sunniest Columns
- ChromaNik Sunrise Columns
Additional column sizes are available - Please contact our Sales Team with your requirements
- Model: CW6951
- Manufactured by: ChromaNik Technologies Inc